BodyGNTX logoBodyGNTXMovement Science Institute
Shoulder & shoulder blade

Shoulder Impingement & Pain

The ball of the shoulder needs the shoulder blade to rotate and tilt underneath it as the arm rises. When the upper back is stiff and the blade does not move well, the space and control around the rotator cuff shrink, and lifting the arm, pressing and pulling start to hurt.

What it feels like

  • Pinch at the front or side of the shoulder when lifting the arm
  • Pain reaching behind the back or into a high shelf
  • Ache when lying on the shoulder at night
  • Pain during bench press, dips or overhead press

The mechanics behind it

Scapulohumeral rhythm

As the arm rises, the shoulder blade must upwardly rotate and tilt back. If the blade lags, the ball of the humerus rides upward and the tendons above it get squeezed.

A rounded upper back blocks overhead reach

A stiff, flexed thoracic spine tips the shoulder blade forward, so reaching overhead runs out of room earlier. Upper-back extension is part of shoulder mobility.

The rotator cuff centres the ball

The cuff's job is to keep the head of the humerus centred while the bigger muscles move the arm. When it is weak or fatigued, the ball drifts and irritates surrounding tissue.

Pressing angles matter

Flaring the elbows to 90 degrees in a bench press or dipping very deep loads the front of the shoulder heavily. A slightly tucked elbow and controlled depth spread the load.

Common movement faults

  • Shrugging the shoulder up to lift the arm
  • Wide-flared elbows on presses
  • Overhead pressing with a rounded upper back
  • Plenty of pressing, very little pulling and rotator cuff work

Simple self-checks

Wall slide

How: Stand with forearms on a wall and slide them up.

What to look for: Watch for the shoulders shrugging, the low back arching to cheat, or pain before the arms are fully overhead.

Back-scratch reach

How: Reach one hand over the shoulder and the other up the back, and compare sides.

What to look for: A large difference between sides suggests rotation limits worth working on.

Arm raise from the side

How: Raise the arm slowly out to the side with the thumb up.

What to look for: Note where in the range pain starts and whether the shoulder blade moves smoothly.

Stop any check that reproduces sharp pain, and do not push through numbness or pins and needles.

A staged movement plan

Calm

Reduce painful positions while keeping the shoulder moving

  • Pendulum swings
  • Pain-free range isometrics
  • Temporarily lowering pressing load and depth

Restore

Restore upper-back and shoulder-blade movement

  • Thoracic extensions on a foam roller
  • Open books
  • Wall slides with lift-off

Load

Build rotator cuff and shoulder-blade strength

  • Side-lying external rotation
  • Face pulls
  • Prone Y-T-W raises
  • Serratus wall push-ups

Integrate

Return to full pressing and overhead work

  • Landmine press
  • Half-kneeling overhead press
  • Push-up variations with good blade movement

Move to the next stage when the current one feels easy and symptoms are settling. A flare-up usually means stepping back one stage, not stopping.

See a clinician first if you have

  • Unable to lift the arm after a fall
  • Shoulder deformity after an injury
  • Pain with chest pressure, breathlessness or sweating: seek emergency care
  • Pins and needles running down the arm

Videos

Clean & Press: Unlock Explosiveness & Power

BodyGNTX video · details

Perfect Your Pullovers: Common Mistakes and Corrective Techniques

YouTube · @bodygntx

Relieve Shoulder Pain & Stiffness: 5 Perfect Moves and Stretches [Easy Shoulder Pain Relief]

YouTube · @bodygntx

Fix Shoulder Pain and Stiffness with these Moves

YouTube · @bodygntx

How to do Perfect Face Pulls for Three Dimensional Shoulders

YouTube · @bodygntx

“How to do Kneeling Shoulder Workout” | Push-Press | Upright Rows | Clean N Press | Overhead press

YouTube · @bodygntx

Read next